Adder Technology AdderView CATx EPS-S8 - Manual (Page 25)
















ADDERVIEW CATx IP
Computer Port
Computer 1 01
Computer 2 02
Computer 3 03
Computer 4 04
Computer 5 05
Computer 6 06
Computer 7 07
Computer 8 08
User port 1 Status
ADMIN SHARED USE
F1-More menus F3-Find
F2-Adj.Video F4-Logout
Configuration menus
The.configuration.menus.allow.you.to.determine.many.aspects.of.the.
AdderView.CATx.capabilities..From.here.you.can:
• Create.individual.user.accounts.and.determine.access.rights,
• Provide.names.for.all.connected.computers.to.allow.quick.recognition,.
• Set.individual.and.global.settings.for.users,.
• Run.various.functions,.such.as.mouse.restore.operation,
• Save.and.load.AdderView.CATx.configuration.settings,.and.more.
To access the configuration menu (local and remote users)
1. If.the.main.menu.is.not.already.displayed,.press.and.hold. . .and.then.
press. .using.a.keyboard.attached.to.a.AdderView.CATx.user.port..
The.main.menu.will.be.displayed:
3. Use.the. .and. .keys.to.highlight.an.option,.then.press. .to.select.
ADDERVIEW CATx IP
Configuration Menu
Functions
Routing status
User Preferences
Global Preferences
Setup Options
Edit Computer List
Edit User List
Edit Autoscan List
Enter-Select
F1-More menus
Esc-Quit
Firmware Version 3.03
Default names for
each computer port
Assistance for
keypress options
Your Login name
Connection status
of this user port
Identification of
this user port
Port numbers
2. Press. .To.display.the.Configuration.Menu:. .
Hotkeys
Note:
and are the standard hotkeys and can be altered to
avoid clashes with other devices or software. If you change the hotkeys,
remember to use the new ones in place of
and when following
the instructions in this guide.
Security
Note: If the security option has been
enabled, you will be asked for a valid
user name and password before the
main menu can be displayed.
IMPORTANT: When supplied, AdderView CATx units have their
security features disabled, which means that any attached users
have access to all connected computers and all AdderView CATx
settings. You are strongly recommended to
enable the ‘Security’
feature and set an access password for the ADMIN account.
ADDERVIEW CATx IP
User Name:
Password:
Port 1 login Esc-Scr Save
To access the configuration menu (global users)
Once.the.IP.settings.have.been.made.(and.the.AdderView.CATx.IP.unit.
is.network.connected),.global.users.can.access.the.configuration.menu.
using.a.different.method.
1. Use.either.the.VNC.viewer.or.a.standard.web.browser.to.make.
remote.contact.with.the.AdderView.CATx.IP.–.see. Global user
access .for.more.details.
2. If.the.username.entry.is.not.blanked.out,.enter.‘admin’.or.another.
login.username..Then.enter.the.admin.password.(if.no.password.is.
set,.then.just.press.
)..Once.logged.in,.the.AdderView.CATx.IP.will.
show.the.video.output.from.the.host.system.(if.one.is.connected),.or.
otherwise.a.‘No.Signal’.message.
3. Click.the.‘Controls’.button.and.select.the.‘KVM.Switch.menu’.
option..All.options.appropriate.to.the.entered.username.will.be.
displayed..
Availability of each
computer:
Green - available
Red - unavailable