Initial ip configuration, Configuration - see, For more details. the other serial – Adder Technology AdderView CATx EPS-S8 User Manual
Page 39: Configure the ip settings, Initial ip, Configuration screens
Next
AdderView CATx IP Modem Config
ATZS0=1
192.168.3.1
192.168.3.2
115200
Initialize Port
Restore Defaults
Init String
Baud Rate
Server IP
Client IP
Screen 3 of 5
Next
AdderView IP Network Config
Net Mask
255.255.255.0
192.168.42.154
No
Gateway
VNC Port
HTTP Port
5900
80
IP Address
00:0F:58:00:00:04
Use DHCP
MAC Address
Screen 2 of 5
Initial IP configuration
IP.models.of.the.AdderView.CATx.family.possess.a.further.collection.of.
configuration.options.related.specifically.to.IP.networking..It.is.important.
that.the.options.are.correctly.set.up.for.your.installation.BEFORE.being.
connected.to.an.open.IP.network.
To configure IP-specific settings
1. From.a.local.user.port.(for.security.reasons,.the.IP.configuration.option.
cannot.be.accessed.from.remote.user.ports),.log.on.as.‘admin’.user.
2. Press.
.
. .(hotkeys.can.be.changed).
3. Press. .to.select.‘More.menus’.
4. Select.‘Functions’.and.then.select.‘Configure.IP.port’.
•. If.the.unit.has.been.reset,.it.will.display..
the.first.of.five.screens,.as.shown.opposite.
•. If.the.unit.has.been.previously.IP-configured.it..
will.display.the.IP Configuration.menu,..
as.shown.below.
. See.
.for.details.
To use the initial IP-configuration sequence
Set.the.options.in.each.screen.and.then.select.Next.to.proceed.
Admin password
Enter.a.password.of.at.least.six.characters.that.has.a.mix.
of.letters.and.numerals..The.background.colour.provides.
an.indication.of.password.suitability.and.is.initially.red.
to.indicate.that.the.password.is.not.sufficient..When.a.
password.with.reasonable.strength.has.been.entered.it.
will.change.to.green..
Time and Date
Set.these.correctly.as.all.entries.in.the.activity.log.are.time.
stamped.using.them.
Encryption
See.
.for.a.description.of.the.issues.
and.the.settings.
Use DHCP/IP address/Net Mask/Gateway
You.need.to.either.set.the.DHCP.option.to.‘Yes’.or.
manually.enter.a.valid.IP.address,.Net.mask.and.Gateway..
See.
.for.more.details.
VNC and HTTP ports
These.should.remain.set.to.5900.and.80,.respectively,.
unless.they.clash.with.an.existing.setup.within.the.
network..See.
.for.more.details.
Modem/ISDN port details
The.default.items.here.are.perfectly.adequate.for.
the.majority.of.modem.and.ISDN.terminal.adapter.
installations.
The.Server.IP.and.Client.IP.addresses.are.used.to.form.an.
isolated.two-device.PPP.network.connection.via.the.dial.
up.link..Their.settings.are.not.related.to.any.other.‘real’.
network.settings.within.the.AdderView.CATx.IP.unit..
Secure keys generation
With.every.mouse.move.and.keypress,.the.single.dash.
will.move.across.the.screen.(unless.the.same.key.is.
pressed.repeatedly)..Periodically,.a.new.star.character.will.
be.added.to.the.bar.as.the.random.data.are.accepted.
as.part.of.the.new.encryption.key..When.the.bar.is.full,.
the.final.encryption.keys.for.your.AdderView.CATx.IP.
will.be.created.–.this.process.takes.roughly.30.to.40.
seconds..Once.the.secure.keys.have.been.calculated.the.
AdderView.CATx.IP.will.show.the.IP.configuration.menu.
Note: Screen 5 of 5 is
displayed while the secure
keys are being generated.
AdderView IP Configuration
Reset Configuration
Back
Modem Configuration
Network Configuration
Unit Configuration
AdderView CATx IP Unit Config
Time
Encryption
Date
21
Prefer Off
4
27
Jan
31
2008
Next
:
:
Unit Name
UK
Admin Passwd
Firmware
1.5
Keybd Layout
Hardware
Rev 1
Screen 1 of 5
AdderView CATx IP Secure Keys
Random data is required to
generate encryption keys
for secure VNC access
Please move the mouse or
press keys until the bar
becomes full
Screen 4 of 5