Access via dial up (modem or isdn) link, If you need to enter a port number, Dial up – Adder Technology AdderView CATx EPS-S8 User Manual
Page 67: Link, If you are using a dial up link, If you have been asked to also enter a port number
If you need to enter a port number
Usually,.when.you.make.a.network.connection.to.the.AdderView.CATx.IP.(either.
using.the.VNC.viewer.or.a.Web.browser).you.simply.enter.the.IP.address,.i.e..
192.168.0.3..However,.if.a.special.configuration.is.necessary,.then.you.may.be.
asked.to.specify.a.port.number.as.well.as.the.IP.address.
To enter a port number in a Web browser
1. Enter.the.required.IP.address.in.the.usual.Address.box,..
i.e..http://192.168.0.3
2. At.the.end.of.the.IP.address,.add.a.single.colon.(
:).and.then.enter.the.port.
number.(in.this.example,.the.required.port.number.is.8000),.
i.e..http://192.168.0.3:8000
3. Continue.with.the.standard.
..
To enter a port number in VNC viewer
1. Enter.the.required.IP.address.in.the.usual.‘Server’.box,..
i.e..http://192.168.0.3
2. At.the.end.of.the.IP.address,.add.two.colons.(
::).and.then.enter.the.port.
number.(in.this.example,.the.required.port.number.is.8000),.
i.e..http://192.168.0.3::8000
3. Continue.with.the.standard.
Access via dial up (modem or ISDN) link
When.you.gain.access.via.modem.or.ISDN.link,.the.AdderView.CATx.IP.uses.
standard.network.protocols.to.create.a.private.two-device.network..This.
approach.ensures.consistency.and.allows.you.to.use.exactly.the.same.VNC.
viewer.or.browser.to.view.the.host.computers..This.is.achieved.using.PPP.(Point.
to.Point.Protocol).and.means.that.you.need.to.use.a.dial-up.networking.method.
to.initiate.the.connection..Such.software.is.standard.with.operating.systems.
such.as.Windows,.Linux.and.Mac.OS.
To initiate a dial up link
1. Using.a.system.that.has.a.modem.or.ISDN.adapter.installed,.locate.the.
dial-up.networking.option.on.your.system..Please.refer.to.your.system.
documentation.for.more.information...
2. Using.the.dial-up.networking.option,.enter.the.telephone/ISDN.number.
where.the.AdderView.CATx.IP.can.be.contacted.
3. Initiate.the.call.and.when.the.link.is.made,.continue.with.either.the.standard.
.or.
..
Note: For the viewer network connection address, you must use the IP
address that the admin user has set as the Server address (or PPP server IP
address) within the Modem configuration screen.