Sony XAV-601BT - Manual (Page 34)

34
Useful Functions
Searching for a track by
listening to track passages
— ZAPPIN™
While playing short track passages from a USB
device or an iPod in sequence, you can search for
a track you want to listen to.
This function is convenient, for example, when
searching for a track in shuffle or shuffle repeat
mode.
1
During audio playback, touch “ZAP.”
In the case of USB Music, ZAP mode starts
from the currently playing track.
The most melodic or rhythmical sections of
tracks are played.
Those passages are played for the set time.
Note
Tracks need to be analyzed by 12 TONE ANALYSIS.
In the case of iPod, ZAP mode starts from a
passage in the next track.
2
Touch “ZAP” when a track you want to
listen to is played.
In the case of USB Music, playback returns to
normal from the current position until the end
of the track.
In the case of iPod, the selected track plays
from the beginning.
To search for a track via ZAPPIN mode again,
repeat steps 1 and 2.
Tips
• You cannot select the track passage to play.
• You can select the playback time. Touch , then
select the playback on time for the ZAPPIN function:
“6 sec.,” “15 sec.,” “30 sec..”
Controlling applications on your
smartphone — MirrorLink™
This function duplicates the smartphone’s display
on the in-car display, so you can control applications
on your smartphone with the bigger screen.
Only a smartphone compatible with the
MirrorLink™ function can be used.
1
Connect your smartphone and the unit
via USB cable.
2
Press (HOME), then touch
“MirrorLink™.”
The smartphone’s display appears on the in-
car display.
Touch and control applications in the same
way as you do on your smartphone.
Note
For your safety, when the parking brake is not
engaged, some smartphone screen content may not
be displayed on AVC.
Enjoying different sources in
front and rear — Zone × Zone
You can simultaneously enjoy different sources
in the front and rear of the car.
Selectable sources for this unit (front) and the
rear monitor (rear) are indicated below.
Front: Any source.
Rear: Disc inserted in this unit.
1
Press (HOME) on the main unit.
2
Touch “ZONE × ZONE” to activate
Zone × Zone.
To operate the source in the front, use the
touch panel and buttons on the main unit.
To operate the source in the rear, use the
remote commander.
Tip
You can also activate/deactivate Zone × Zone by
pressing (Z x Z) on the remote commander.
To deactivate Zone × Zone
Touch “ZONE × ZONE” again in the HOME
menu.
Notes
• Once (SOURCE/OFF) on the main unit or remote
commander is pressed, Zone × Zone is deactivated.
• While Zone × Zone is activated, the following buttons
on the remote commander become inactive:
(SRC), (MODE), (ATT), (VOL) +/–, (CLEAR),
number buttons.
• While Zone × Zone is activated, you can only
operate rear DVD playback by the remote
commander.
“ZAP” touched.
The playback section of each
track in ZAPPIN mode.
“ZAP”
touched. The playback section of each
track in ZAPPIN mode.