Sony DCR-TRV950 - Manual (Page 168)

168
You can play back moving pictures recorded on a “Memory Stick.” You can also play
back six images including still images in order at a time by selecting the index screen.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV950 only) or VCR.
Make sure that the LOCK switch is set to the further side (unlock position).
(2) Press PLAY or PB. The last recorded image is displayed.
(3) Press +/– to select the desired moving pictures.
– : To see the previous picture
+ : To see the next picture
(4) Press MPEG N X to start playback.
(5) To adjust the volume, press either of the two buttons on VOLUME.
– : To turn down
+ : To turn up
When you close the LCD panel, sound is muted.
To stop MPEG movie playback
Press MPEG N X.
Note
You may not be able to play back images with your camcorder:
– When playing back image data modified on your computer.
– When playing back image data shot with other equipment.
To play back recorded images on a TV screen
• Before operation connect your camcorder to the TV with the A/V connecting cable
supplied with your camcorder.
• Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
Moving pictures
You can select moving pictures also with –/+ on PAGE1/PAGE2/PAGE3.
When no image is recorded on the “Memory Stick”
When you press MEMORY PLAY on the Remote Commander, the message “
NO
FILE” appears.
Viewing moving pictures
– MPEG movie playback
PLAY PB
2
VOLUME