Error displays/messages – Sony CDX-GT72W User Manual

Page 18

Advertising
background image

18

Error displays/Messages

The Auto Off function does not operate.

The unit is turned on. The Auto Off function activates
after turning off the unit.
t Turn off the unit.

Card remote commander operation is not
possible.

Make sure the insulation film has been removed
(page 4).

DSO does not function.

Depending on the type of car interior or type of music,
DSO may not have a desirable effect.

The images change automatically.

In Auto Image mode, the selected image cannot be
displayed.
t To display selected image only, set to “Auto Image

off” (page 10).

Any display items do not display.

t Set to “Info All” (page 11).

Cannot adjust the volume level

The portable audio device was not connected when
AUX was selected as (SOURCE).
t Connect the portable audio device to the AUX input

jack.

CD/MD playback

The disc cannot be loaded.

• Another disc is already loaded.
• The disc has been forcibly inserted upside down or in

the wrong way.

The disc does not playback.

• Defective or dirty disc.
• The CD-Rs/CD-RWs are not for audio use (page 14).

MP3/WMA/AAC files take longer to play back
than others.

The following discs take a longer time to start
playback.
– a disc recorded with a complicated tree structure.
– a disc recorded in Multi Session.
– a disc to which data can be added.

The display items do not scroll.

• For discs with very many characters, those may not

scroll.

• “Auto Scroll” is set to off.

t Set to “Auto Scroll on” (page 11) or press

(SCRL).

The sound skips.

• Installation is not correct.

t Install the unit at an angle of less than 45° in a

sturdy part of the car.

• Defective or dirty disc.

The operation buttons do not function.
The disc will not eject.

Press the RESET button (page 4).

Radio reception

The stations cannot be received.
The sound is hampered by noises.

• Connect a power antenna (aerial) control lead (blue)

or accessory power supply lead (red) to the power
supply lead of a car’s antenna (aerial) booster (only
when your car has built-in FM/AM antenna (aerial)
in the rear/side glass).

• Check the connection of the car antenna (aerial).
• The auto antenna (aerial) will not go up.

t Check the connection of the power antenna

(aerial) control lead.

• Check the frequency.
• When the DSO mode is on, the sound is sometimes

hampered by noises.

t Set the DSO mode to “off” (page 9).

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

Automatic tuning is not possible.

• The local seek mode is set to “on.”

t Set to “Local off” (page 11).

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication
flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set to “Mono on” (page 11).

An FM program broadcast in stereo is heard in
monaural.

The unit is in monaural reception mode.
t Set to “Mono off” (page 11).

Blank Disc

Tracks have not been recorded on the MD.

*

1

t Play an MD with recorded tracks.

Error*

2

• The disc is dirty or inserted upside down.

*

1

t Clean or insert the disc correctly.

• A blank disc has been inserted.
• The disc cannot play because of some problem.

t Insert another disc.

Failure

The connection of speakers/amplifiers is incorrect.
t See the installation guide manual of this model to

check the connection.

Failure (Illuminates for about 1 second.)

When the SAT tuner is connected, storing an SAT
radio channel into a preset failed.
t Be sure to receive the channel that you want to

store, then try it again.

Load

The changer is loading the disc.
t Wait until loading is complete.

Local Seek +/–

The local seek mode is on during automatic tuning.

Advertising