Panasonic DMWMCTZ30E - Manual (Page 21)

21
VQT4C30
∫ Notes
Be careful when removing the digital camera from the Case so that it does not get wet.
≥
Remove the camera with clean hands. (Wash your hands with fresh water and then
thoroughly dry them.)
≥
Thoroughly dry any moisture on your body or hair. (Be particularly careful about any
water coming from the sleeves of your thermal suit.)
≥
When the weather or the sea is particularly bad, select a place where the digital
camera will not get wet e.g. indoors or where there is a roof overhead.
Cleaning and Storing
1
Wash the outside of the Case with water.
≥
Wash the outside of the Case until it is clean. (P20)
≥
Confirm that the O-ring is set securely, be sure to close the Case, and then
wash only the outside with water.
≥
Wipe off any dirt inside the Case with a wet, soft cloth.
∫ Notes
≥
Do not wash the Case with high-pressure water as it may cause water leakage.
Remove the digital camera before washing the Case with water.
≥
Do not leave the digital camera inside the Case when storing it.
≥ Detach the O-ring from the marine case and store so it will not dry. For details,
please read page 22.
When storing for a long period of time, insert in the supplied exclusive polyester bag
after first removing the O-ring.
≥ To prevent the weights and weights attachment screw from rusting, detach after use
and thoroughly remove any salt or water before storing.
Caution for Use
∫ Handling of the O-ring
≥ Do not use alcohol, thinner or a chemical cleaning agent for cleaning the O-ring.
This will cause damage to, or deterioration of, the O-ring.
≥
If you will not be using the Case for a long period of time, remove the O-ring
from the O-ring groove, apply a thin coat of grease (supplied), place it in a
polyester bag and then store it in a cool, dark place to prevent the surface
from being damaged. When you use the O-ring again, thoroughly check that it
is not scratched, damaged or split.
DMW-MCTZ30-VQT4C30.book 21 ページ ２０１２年１月１２日 木曜日 午前１０時５０分