Panasonic NCZK1VXE - Manual (Page 21)

21
English
3 Turn on the power switch.
(Press “ ”) 4 Remove from the power
base and pour.
Start boiling the
water.
( Power indicator
lights up. )
When the water has boiled, the power
switch turns off automatically.
The kettle takes around 3 minutes to boil. •
( Water temperature 23°C, room
temperature 23°C, water to max level
To stop boiling before the •
water has boiled, turn off
the power switch.
Note
Immediately after the water has boiled, •
do not force the kettle to continue heating
the water by keep pressing the power
switch. (It may cause malfunction.)
)
During use, the power
indicator lights up.
0.6
1.0
Max 1.4
 After use, pour out any remaining
water.
0. 6
1.0
Max 1. 4
* Keep the lid closed when pouring
away the water.
0.6
1.0
Max 1.4
Empty-use prevention function
When the power switch is on without water, an empty-use prevention function works to
automatically turn off the power in order to prevent accidents and malfunction due to
overheating.
 Allow the body to cool sufficiently.
 Remove the body from the power base and fill the water.
 Place it on the power base and turn on the power switch again.
* If you boil the kettle without water, it may smell strange.