Panasonic NCZK1VXE - Manual (Page 23)

23
English
Check the following before contacting the shop or asking for a repair.
Problem Cause How to correct
Water does not boil.
(
Power switch does
not turn on.
)
Is the mains plug
 
plugged in?
Insert the mains plug
 
into the household mains
socket. (P.20)
Is the body set correctly
 
on the power base?
Ensure the body is set
 
correctly.
Is the power switch
 
turned off?
Press
 
", and turn on
the power switch. (P.21)
Is there a piece of metal
 
or foreign material
adhered to the power
base connector or body
connector? Remove the piece
 
of metal or foreign
material. (P.22)
Once the kettle has boiled, the power switch is
 
automatically turned off and cannot be turned on for
approximately 3 minutes.
Did you try to turn on
 
the power switch without
water in the kettle?
( The Empty-use
prevention function
will work to turn off the
power switch. )
Fill with water and turn
 
on the power switch.
(P.20)
Hot water may burst
out from the spout.
Is the water level above
 
the maximum water
level?
Reduce the water down
 
to the maximum water
level or lower. (P.20)
Water is dripping from
the bottom of the
body.
Since the kettle is designed to sense steam and turn off
 
the power switch, the steam can condense and drip from
the bottom of the body as water droplets.
This is not malfunction.
Troubleshooting