Operation with the remote control – Panasonic TX32A300E User Manual

Page 5

Advertising
background image

English - 4 -

Scroll through the stored channels by pushing the

button up or down
To change source: Press the middle of the button

twice, the source list will appear on screen. Scroll

through the available sources by pushing the button

up or down.
To turn the TV off: Press the middle of the button

down and hold it down for a few seconds, the TV will

turn into standby mode.

Operation with the Remote Control

Press the

MENU button on your remote control to

display the main menu screen. Use the “ ” or “

” buttons to select a menu tab and press the

OK

button to select option. Use the “ ” or “ ” or “ ” or

“ ” buttons to select or set an item. Press

BACK/

RETURN, EXIT or MENU button to quit a menu

screen.
Input Selection
Once you have connected external systems to your

TV, you can switch to different input sources. Press

the

AV button on your remote control consecutively

to select the different inputs.
Changing Channels and Volume
You can change the channel and adjust the volume

by using the

V+/- and P+/- buttons on the remote.

Inserting the Batteries into the Remote

Lift the cover on the back of the remote upward

gently. Install two

AAA batteries. Make sure to

match the + and - ends of the batteries in the

battery compartment (observe the correct polarity)

Replace the cover.

Connect Power

IMPORTANT: The TV set is designed to operate on

220-240V AC, 50 Hz socket. After unpacking, allow

the TV set to reach the ambient room temperature

before you connect the set to the mains. Plug the

power cable to the mains socket outlet.

Antenna Connection

Connect the “aerial” or “cable TV” plug to AERIAL
INPUT (ANT) socket located on the back of the TV.

H

D

M

I1

H

D

M

I 2

SPDIF

Coax.OUT

H

D

M

I1

H

D

M

I 2

SPDIF

Coax.OUT

Notification

Manufactured under license from Dolby Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

“HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC.”

Information for Users on Disposal of Old

Equipment and Batteries
[European Union only]
These symbols indicate that equipment with these

symbols should not be disposed of as general

household waste. If you want to dispose of the

product or battery, please consider the collection

systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates
that this battery contains lead.

Products

Battery

Advertising
This manual is related to the following products: