Panasonic TX32A300E - Manual (Page 8)

English - 7 -
NOTE: When connecting
a device via the YPbPr or
Side AV input, you must
use connection cables to
enable connection. See the
illustrations on the left side. | To
enable PC audio, you will need
to connect an AUDIO cable to
the side audio inputs. | If an
external device is connected
via the SCART socket, the TV
will automatically switch to AV
mode. | When receiving DTV
channels (Mpeg4 H.264) or
while in Media Browser mode,
output will not be available via
the scart socket. | When using
the wall mounting kit (optional),
we recommend that you plug all
your cables into the back of the
TV before mounting on the wall.
| Insert or remove the CI module
only when the TV is SWITCHED
OFF. You should refer to the
module instruction manual for
details of the settings. | Each
USB input of your TV supports
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your
TV. By connecting an HDMI cable
to your TV, you have to use only a
shielded HDMI cable to guarantee
a sufficient immunity against
parasitic frequency radiation.
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
Side Audio/Video
Connection Cable
(Supplied)
PC Audio Cable
(Not supplied)
HDMI
Connection
(back)
SPDIFF
(Coaxial Out)
Connection
(back)
YPBPR
YPbPr Video
Connection
(side) YPbPr Connection
Cable (supplied)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
AV Connection Cable
(supplied)
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
Getting Started
Connections
If you want to connect a
device to the TV, make
sure that both the TV and
the device are turned off before
making any connection. After the
connection is done, you can turn
on the units and use them.