Aiwa CSD-FD89 - Manual (Page 10)

• Use Type I (normal) tapes only.
• The unit plays (records on) the side facing up.
PLAYBACK
1
Press TAPE.
The power is turned on.
2
Press PUSH EJECT to open the cassette
holder and insert a tape with the side to
be played facing up and the exposed
side facing forward.
Press PUSH EJECT to close.
3
Press e PLAY/PAUSE to start
playback.
To set the tape counter to “0000”
Press s in stop mode. The counter is also set to
“0000” when opening the cassette holder.
s STOP/SET/CLEAR * – Stops play.
* or s STOP on the remote control (CSD-FD89/79
only)
e PLAY/PAUSE – Pauses play. During pause
mode, the tape counter flashes. To resume play,
press again.
f/g – Rewinds/ fast forwards. To stop the
winding, press s .
After listening, press POWER 6 STANDBY/ON to
turn the power off.
TAPE OPERATION
C
RECORDING
1
Insert a tape with the side to be recorded
on facing up and the exposed side facing
forward.
2
Get ready to record from the source.
To record from a CD, press CD and load the disc.
To record from a radio broadcast, press
RADIO BAND and tune to a station.
3
Press w REC.
The unit enters recording pause mode and “REC”
flashes slowly in the display.
4
Press e to start recording.
“REC” lights up in the display.
When the selected function is CD, CD play and
recording starts simultaneously.
To record only the selected tracks of a CD
1 Follow steps 1 to 4 of PROGRAMMED PLAY on
page 9 to program tracks.
2 Press w .
3 Press e .
To stop recording, press s .
To pause recording (only when the source is RADIO) ,
press e . During recording pause mode, “REC”
flashes slowly. To resume, press it again.
To erase recording, press TAPE and start recording
(press w then e ).
After recording, press POWER 6 STANDBY/ON to
turn the power off.
10
ENGLISH
POWER 6 STANDBY /
ON
s STOP / SET / CLEAR
TAPE
w REC
e PLAY / PAUSE
f , g
REPEAT / MODE /
SLEEP
Tape counter
PUSH EJECT