Aiwa CSD-FD89 - Manual (Page 9)

PROGRAMMED PLAY
Up to 30 tracks can be programmed from the disc.
1
In stop mode, hold down s STOP/SET/
CLEAR * until “M” flashes in the display.
The program number, “P-01” is also displayed.
* or s STOP on the remote control (CSD-FD89/79
only)
2
Press f or g to select a track, then
press s to store it.
Pressing the numbered buttons 0-9 and +10 on the
remote control selects and stores the track at the
same time (CSD-FD89/79 only).
3
Repeat step 2 to program other tracks.
4
Hold down s to finish the program.
Total number and total playing time of the selected
tracks are displayed.
Pressing e finishes the program and starts
programmed play.
ENGLISH
9
En
To check the program, press f or g .
To clear the program, press s once in stop mode so
that “M” disappears in the display.
To change the programmed tracks, clear the
program and repeat all the steps again.
NOTE
The total playing time of the selected tracks will be
displayed as “
” :
- When it exceeds “99:59”.
- When a track number 31 or higher is selected.
REPEAT, RANDOM PLAY
A single track or all tracks can be played repeatedly,
and all the tracks randomly. Random play can be
repeated as well.
Press REPEAT/MODE/SLEEP * repeatedly.
The mode changes as follows:
: Repeats a single track. Select a track with f
or g .
: Repeats all the tracks.
RANDOM: Plays all the tracks randomly.
RANDOM and : Plays all the tracks repeatedly in
random order.
To cancel, press the button repeatedly so that and/
or RANDOM disappears.
* or REPEAT on the remote control (CSD-FD89/79
only)
NOTE
• During random play, you cannot skip back to the
previous track with f .
• When selecting a track with the numbered buttons,
random play is canceled.
• During programmed play, you cannot select
RANDOM and .
Selected track number
Total playing time of
the selected tracks Next program number
Total playing time of the
selected tracks
Total number of the
selected tracks
0-9, +10
REPEAT
e PLAY / PAUSE
f , g
s STOP
(CSD-FD89/79 only)