Removing and attaching shelves, Making ice cubes, User alert functions – Panasonic NRB32SW1 User Manual

Page 12

Advertising
background image

12

12

Water level line

Open the freezer, pull out the upper drawer and take out the ice tray. Fill water in the ice tray to the water level line and

then place back the ice tray.

When ice cubes are ready, pull out the upper drawer and take out the ice tray. Slightly twist the ice tray by holding its two

sides, the ice cubes will drop from the ice tray. Then, put the ice tray back into its place.

Removing and attaching shelves

Fridge

Glass shelves

Lift the inner side of the shelf

slightly and pull it out.

When removing the glass

shelves, before pulling them

out, remove the door and

bottle shelves first if they

are in the way.

Crispers

Pull the crispers towards you

and pull it out.

Door shelves and bottle

shelves

Lift it slightly and then

remove it.

Freezer

Pull the drawer towards you, lift the front slightly, and pull it out.

Having removed the drawer, you can store food in the empty compartment.

Making ice cubes

User alert functions become active in the following situations.

Situation

Details

Alarm

How to stop the alarm

Mode has ended.

• The set time has been reached in Bottle

Mode.

Beeps continuously

Press

.

Problem detected.

• Any problem has occurred in sensor,

compressor, cooling system, or heater.

• The voltage is low.

Beeps every 5 seconds

Press

.

Door ajar.

• The fridge door has been left ajar for more

than 2 minutes.

Beeps every 5 seconds

Press

.

User alert functions

Advertising
This manual is related to the following products: