Audiovox Prestige P967 - Manual (Page 10)

-10-
1. Switch the vehicle ignition and radio “on”.
2. Press the T/F button to call the time display; then press and hold the button until the time display flashes.
3. While the display is flashing, press the Up TUNE/SEEK/TRACK ( / ) button to adjust the hours and AM/PM indication, or the
Down TUNE/SEEK/TRACK ( / ) button to adjust the minutes to the correct time.
4. Five seconds after the last hour or minute adjustment is made, the time will be set in the unit and the display will return to the
normal indication.
SETTING THE CLOCK
If a problem should develop while operating the CD player, an error code (ER-1, ER-2, ER-3, etc.) may appear on the display
panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor
control of the player. If an error code should appear, try ejecting and re-loading the disc into the player. While the disc is out
of the unit, make sure it is clean, undamaged, and loaded correctly (label surface up). You may also try activating the
RESET button
cu
on the unit, but this will also erase the time and pre-set memories.
CD PLAYER ERROR CODES