Audiovox Prestige P967 - Manual (Page 8)

dl
DISC EJECT ( )
During CD player operation, after disc play is stopped, the disc can be
ejected when this button on the front of the chassis is pressed when
the front panel is folded down. If the disc is not removed from the unit
within approximately 10 seconds of being ejected, it will automatically
be re-loaded into the unit to prevent it from being accidentally damaged.
Play of the disc will start from the beginning of the first track on the
disc after the front panel is returned to the upright and locked position.
CD-IN will appear in the front panel. Disc play is initiated by pressing
the MODE/FUNC button.
NOTE: Never leave a disc engaged in the player when not in use.
Doing so can cause damage to the disc and/or mechanism
of the unit. Always press the eject button and remove the
disc when leaving the vehicle.
dm
FRONT PANEL RELEASE BUTTON (OPEN)
This button is used to release the front panel to the fold-down
position. To detach the front panel, press the button so that the
panel drops to the lowered position. Apply slight pressure to the
inner right corner of the panel and disengage the right side from the
ball mechanism by pulling the panel toward you; then disengage
the left side and remove the panel from the radio. To re-attach the
panel, engage the panel socket on the left side first; then press the
right side straight onto the chassis until the ball mechanism engages
the right socket.
During radio operation, when the panel is lowered, the radio will
continue to play, but the station cannot be changed until the panel
is returned to the upright and locked position.
Furthermore, in the fold-down position, no controls are operational.
-8-
cs
DISC SELECT UP/DOWN
These buttons are used to select the desired disc for play during
changer operation. To advance to a higher number disc, press the
DISC UP button, and to return to a lower number disc, press the
DISC DN button. The number of the disc in play will be shown on the
display panel.
ct
CLOCK (T/F) ADJUST FUNCTION
During radio operation, momentarily press this button to call the
time display on the incorporated quartz clock. The current time will
appear together with an AM (A) or PM (P) indication. The display
will return to the radio frequency indication after 5 seconds.
During CD player or optional CD changer operation, the first press
of this button will display the current time, and a second press of
this button will return to disc operation. In either case, the display
will return to the disc indication after 5 seconds.
cu
RESET BUTTON
The RESET button is located in the lower left corner of the chassis
behind the front panel. The reset circuitry should only be activated
under the following circumstances as it will erase the time and pre-
set memories:
1. Upon initial installation after all wiring is completed.
2. If there is a malfunction of any of the switches on the unit,
pressing the RESET button may clear the system and
return to normal operation.