Panasonic RRXS450E - Manual (Page 52)

VQT4J81
52
52
Editing: Combining fi les
1 Select “COMBINE” in the editing setting
screen (➜ “Displaying the editing setting
screen”, page 51).
2 Press +, – to select “PREVIOUS FILE” and
press [q OK] to enter.
3 Press +, – to select the fi le
to be combined and press
[q OK] to enter.
When selecting the file in another
folder, you can move within folder
hierarchies by pressing u. (For
details of file and folder selection
methods, see page 13.)
4 Press +, – to select “NEXT FILE” and press
[q OK] to enter.
5 Press +, – to select the fi le to
be combined at the back of
the previous fi le and press
[q OK] to enter.
6 Press +, – to select “NEXT” and press
[q OK] to enter.
7 Press +, – to select “YES” and press
[q OK] to enter.
While the files are being combined, the status
indicator flashes.
• If you press [F2 (CLOSE)] before combining is
complete, the combine process is cancelled.
* Combined files cannot be returned to their original
state. It is recommended that you make backup copies
of the files in advance.
* If indexed files are combined, the indexing is erased.
* The combined file is saved in the same folder as the
previous files.
Files cannot be combined in following cases.
* Files in the MUSIC (M) folder, OTHER FOLDER ( ) or
recycle bin ( ) folder.
* When the battery indicator displays “ ” (blinking) or
“ ”.
* Combining files from the internal memory with files
from the SD card.
* If the total file size after combining will exceed 2 GB.
* If there is less free memory space than the size of the
“NEXT FILE”.
* If the recording mode of the two files is different.
2 files recorded on this unit can be combined into 1 file.
VQT4J81_RR-XS450_420-E_En.indd 52 VQT4J81_RR-XS450_420-E_En.indd 52 2012/05/29 9:35:47 2012/05/29 9:35:47