Connection, When placing the camera on a table surface etc – Panasonic TYCC20W User Manual

Page 6

Advertising
background image

6

E

NGLISH

When placing the camera on a

table surface etc.

Place the camera on a fl at surface in front of the television, at
approximately face height.

NOTE

• If the camera is placed near to the television speakers, a high-pitched

noise known as “howling” may occur depending on the volume of
the television. If howling occurs, lower the volume of the television
speakers.

Connection

Connect the USB cable of the camera to the USB port on the
television.
1. Press the power button on the television to switch the

television power off.

2. Insert the USB cable of the camera into the USB port on the

television.

To USB port

*1

USB Cable

*1 For details of the connection to the USB port, see the

television operating instructions.

Make sure the USB connector is facing the same direction as
the USB port.

3. Press the power button on the television to switch the

television power on.

NOTE

• Always use the button on the television to switch the power ON and OFF.
• Do not use a USB hub to connect to the television. Always connect the

camera USB connector directly to the television.

• You cannot connect this camera to a computer or other make of

television for use.
Always connect this camera to a Panasonic television that is equipped
with USB ports.

TY-CC20W.indb 6

TY-CC20W.indb 6

3/19/2012 5:26:40 PM

3/19/2012 5:26:40 PM

Advertising