Avaya 3645 - Manual (Page 15)

15
Getting Started
Getting Started
Your Avaya 3641/3645 Wireless IP Telephone is designed for full mobility
within the workplace and operates much like a cell phone. It also interfaces
with the telephone system at your workplace and incorporates advanced
telephony features. This section covers the basic functions available in
every facility. For specific telephony system functions, see the Facility-
Specific Features section or contact your system administrator.
Charging Your Handset
The handset’s Battery Pack must be charged charged for a minimum of
two hours before its first use. See the section Handset Accessories for
complete information about charging your handset.
Indications of Low Battery
The Battery Pack icon on the status line of the display gives you a visual
indication of the amount of charge remaining in the Battery Pack. Addi-
tionally, when the icon shows empty, if the handset is in standby mode,
you will hear a brief, modulated-ring signal and the Battery Low mes-
sage displays. The handset may not be used until charged. If you are in a
call, soft beeps will sound, first slow and then fast, until the handset
becomes unusable. When you first start to hear the beeps, you have two
minutes to end the call or change the Battery Pack.
The Battery Pack can be changed while the call is still in progress. Do not
press END . Quickly remove the discharged Battery Pack and replace with
a charged Battery Pack, press END to turn the handset back on and then
press START to resume the call.
See the Handset Accessories section for complete information about
chargers.
21-601633_1.book Seite 15 Freitag, 13. Juli 2007 4:42 16