Treble control, High pass filter, Loudness on / off – Alpine CDE-9873 User Manual

Page 14: Setting the treble control, Adjusting the high pass filter, Turning loudness on/off

Advertising
background image

13

-EN

Setting the Treble Control

You can change the Treble Frequency emphasis to create your own tonal
preference.

1

Press A.SEL/SETUP repeatedly to select the
TREBLE mode.

BASS

TREBLE

HPF

BASS

2

-1 Press BAND to select the desired treble center

frequency.

10.0kHz

12.5kHz

15.0kHz

17.5kHz

10.0kHz

Emphasizes the displayed treble frequency ranges.

2

-2

*2

Turn the Rotary encoder to select the desired

treble level (–7~+7).

You can emphasize the treble level.

3

Press and hold

/ESC for at least 2 seconds to

return to normal mode.

If no operation is performed for 15 seconds, the unit will return to

normal mode automatically.

The treble level settings will be individually memorized for each

source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).

The function is inoperable when DEFEAT is set to ON.

*

2

The adjustment can also be made by pressing Rotary encoder. Refer
to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” (page 12).

Adjusting the High Pass Filter

The High Pass Filter on this unit can be adjusted to suit your personal
taste.

1

Press A.SEL/SETUP repeatedly to select the HPF
mode.

BASS

TREBLE

HPF

BASS

2

Turn the Rotary encoder to select the desired HPF
frequency.

OFF

80Hz

120Hz

160Hz

All frequencies above the selected cutoff are output.

3

Press and hold

/ESC for at least 2 seconds to

return to normal mode.

If no operation is performed for 15 seconds, the unit will return to

normal mode automatically.

The function is inoperable when DEFEAT is set to ON.

Turning Loudness On/Off

Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.

Press and hold Rotary encoder (LOUD) for at least 2
seconds to activate or deactivate the loudness mode.

The function is inoperable when DEFEAT is set to ON.

Setting the Treble Center Frequency

Setting the Treble Level

Advertising