ArtDio IPS-3101h - Manual (Page 15)

User’s Manaul
15
Admin
Password This contains the password to access the Web Configuration Menu.
This field is case sensitive.
WAN IP Address There are 2 modes under which the IPS-3101h can operate:
- If DHCP mode is enabled, then all the field values for the Static IP
mode are not used (even though they are still saved in the Flash
memory.) The IPS-3101h will acquire its IP address from the first DHCP
server it discovers from the LAN it is connected to.
To use the PPPoE feature set the PPPoE account settings. The VoIP
gateway will attempt to establish a PPPoE session if any of the PPPoE
fieds is set.
- If Static IP mode is selected, then the IP address, Subnet Mask,
Default Router IP address, DNS Server 1 (primary), DNS Server 2
(secondary) fields will need to be configured. These fields are reset to
zero by default.
SIP Server This field contains the URI string or the IP address (and port, if different
from 5060) of the SIP proxy server. e.g., the following are some valid
examples: sip.my-voip-provider.com, or sip:my-company-sip-
server.com, or 192.168.1.200:5066
Outbound Proxy This field contains the URI string or the IP address (and port, if different
from 5060) of the outbound proxy. If there is no outbound proxy, this
field SHOULD be left blank. If not blank, all outgoing requests will be
sent to this outbound proxy.
SIP User ID This field contains the user part of the SIP address for this IPS-3101h.
e.g., if the SIP address is: sip:my_user_id@my_provider.com, then the
SIP User ID is: my_user_id. Please do NOT include the preceding “sip:”
scheme or the host portion of the SIP address in this field.
SIP User ID is
Phone Number If the IPS-3101h has an assigned PSTN telephone number, then this
field will be set to “Yes”. Otherwise, set it to “No”. If “Yes” is set, a
“user=phone” parameter will be attached to the “From” header in SIP
request.
SIP Login ID This field contains the login ID used for SIP authentication. Typically,
this is the account number on an SIP server for this IPS-3101h. It can
be the same as or different from the above SIP User ID, depending on
whether a separate account ID is used for authentication.
SIP Password This field contains the password used for SIP authentication. It is used
together with the above SIP Login ID