ArtDio IPS-3101h - Manual (Page 22)

User’s Manaul
22
NAT/DHCP Server Configuration:
NAT/DHCP Server Information & Configuration:
WAN IP Address: 192.168.XX.XX
Cloned WAN
MAC Addr:
(in hex format)
LAN Subnet
Mask:
(default is 255.255.255.0)
LAN DHCP Base
IP:
(base IP for the LAN port, default is 192.168.2.1)
DHCP IP Lease
Time:
0
(in units of hours, default is 120 hours or 5 days)
DMZ IP:
Port Forwarding:
WAN port
0
LAN IP LAN port
0
Protocol
"UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
"UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
"UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
"UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
"UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
"UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
"UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
"UDP Only"
WAN IP Address Shows the IP address at the WAN side of the IPS-3101h.
Cloned WAN MAC
Address: Allow the user to set a specific MAC address. Set in Hex format
LAN Subnet Mask
Sets the LAN subnet mask. Default value is 255.255.255.0
LAN DHCP Base IP:
Base IP for the LAN port, which function as a Gateway for the subnet.
Default value is 192.168.2.1
DHCP IP Lease
Time:
Value is set in units of hours. Default value is 120hr (5 Days.) The
time IP address are assigned to the LAN clients
DMZ IP:
Forward all WAN IP traffic to a specific IP address if no matching port
is used by IPS-3101h itself or in the defined port forwarding.