Using the trimmer – Panasonic ER2171 User Manual
Page 4
4
English
Shaping your moustache
1. Remove the comb attachment.
2. Place the angled edge against the
skin and make the border of the
beard even.
Using the thinning function
1. Slide the thinning plate upwards until it
clicks.
2. Run the trimmer slowly across
the head as if combing the hair
with applying the blade point at
right angles (90°) to the hair.
Thin the hair gradually while
checking the overall balance.
•
3. Push the thinning plate lock button to
slide the thinning plate back.
►
►
Using the trimmer
Use
Trimming your beard and moustache
1. Apply a few drops of the oil to the blades.
(See page 6.)
2. Turn the dial to move the comb attachment
to the desired trimming length (between
1 mm and 20 mm).
Indicator
Trimming
length
Indicator
Trimming
length
1
1.0 mm
11
11.0 mm
2
2.0 mm
•
12.5 mm
•
3.5 mm
14
14.0 mm
5
5.0 mm
•
15.5 mm
•
6.5 mm
17
17.0 mm
8
8.0 mm
•
18.5 mm
•
9.5 mm
20
20.0 mm
3. Slide the switch on the main body upwards to turn on
the trimmer.
4. Place the angled face of the comb
against the skin and cut the beard by
moving the trimmer in all directions to
obtain a uniform cut.
With curly facial hair, the comb attachment
may not cut all of the hair. In this case,
remove the comb attachment and use a
conventional comb to draw out the
remaining uncut hair.
•
►