Panasonic SCPMX7EG - Manual (Page 6)

VQT4X
4 9
6
6
ENGL
ISH
Bluetooth ® operations
By using the Bluetooth ® connection, you can listen to the
sound from the Bluetooth ® audio device from this system
wirelessly.
Refer to the operating instructions of the Bluetooth ®
device for details.
Preparation
• Turn on the Bluetooth ® feature of the device and place
the device near this system.
• If this system is already connected to a Bluetooth ®
device, disconnect it.
1 Press [SELECTOR] repeatedly to select
“BLUETOOTH”.
If “Pairing” is indicated on the display, go to step 3.
2 Press [PLAY MENU] to select “New Device” and
then press [OK].
“Pairing” is indicated on the display.
3 Select “SC-PMX7” from the Bluetooth ® device’s
Bluetooth ® menu.
4 Start play on the Bluetooth ® device.
Note:
• If prompted for the passkey, input “0000”.
• You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Preparation
• Turn on the Bluetooth ® feature of the device and place
the device near the speaker unit.
• If this system is already connected to a Bluetooth ®
device, disconnect it.
1 Press [SELECTOR] repeatedly to select
“BLUETOOTH”.
“Ready” is indicated on the display.
2 Select “SC-PMX7” from the Bluetooth ® device’s
Bluetooth ® menu.
The name of the connected device is indicated on
the display for 2 seconds.
3 Start play on the Bluetooth ® device.
Note:
• This system can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this
system will automatically try and connect to the last
connected Bluetooth ® device.
• The Bluetooth ® device will be disconnected if a different
audio source (e.g., “CD”) is selected.
You can change the transmission speed to prioritize
transmission quality or sound quality.
Preparation
• Press [SELECTOR] repeatedly to select “BLUETOOTH”.
• If a Bluetooth ® device is already connected, disconnect
it.
1 Press [PLAY MENU] repeatedly to select
“Link Mode”.
2 Press [2, 1] to select the mode and then press
[OK].
Mode 1: Emphasis on connectivity
Mode 2: Emphasis on sound quality
If the sound input level of the Bluetooth ® transmission is
too low, change the input level setting.
Preparation
• Connect a Bluetooth ® device.
1 Press [PLAY MENU] repeatedly to select “Input Level”.
2
Press [2, 1] to select the level and then press [OK].
“Level 0” ,. “Level i1” ,. “Level i2”
^-----------------------------------------J
Note:
• Select “Level 0” if the sound is distorted.
1 While a Bluetooth ® device is connected:
Press [PLAY MENU] to select “Disconnect?”.
2 Press [2, 1] to select “OK? Yes” and then press [OK].
About Bluetooth ®
Frequency band used
• This system uses the 2.4 GHz frequency band.
Certification of this device
• This system conforms to frequency restrictions and
has received certification based on frequency laws.
Thus, a wireless permit is not necessary.
• The actions below are punishable by law in some
countries:
- Taking apart or modifying this system.
- Removing specification indications.
Restrictions of use
• Wireless transmission and/or usage with all Bluetooth ®
equipped devices is not guaranteed.
• All devices must conform to standards set by Bluetooth
SIG, Inc.
• Depending on the specifications and settings of a
device, it can fail to connect or some operations can be
different.
• This system supports Bluetooth ® security features. But
depending on the operating environment and/or
settings, this security is possibly not sufficient.
Transmit data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth ®
device.
Range of use
• Use this device at a maximum range of 10 m.
The range can decrease depending on the
environment, obstacles or interference.
Interference from other devices
• This system may not function properly and troubles
such as noise and sound jumps may arise due to radio
wave interference if this system is located too close to
other Bluetooth ® devices or the devices that use the
2.4 GHz band.
• This system may not function properly if radio waves
from a nearby broadcasting station, etc. is too strong.
Intended usage
• This system is for normal, general use only.
• Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals, laboratories,
etc).
Pairing Bluetooth ® devices
Connecting a paired Bluetooth ® device
Bluetooth ® transmission mode
• The default setting is “Mode 1”.
• To enjoy a higher sound quality, select ”Mode 2”.
Bluetooth ® input level
Disconnecting a Bluetooth ® device
Panasonic bears no responsibility for data and/or
information that is compromised during a
wireless transmission.
SC-PMX7EG-VQT4X49.book 6 ページ ２０１３年１月２５日 金曜日 午前１０時３１分