Panasonic SCPMX7EG User Manual

Page 8

Advertising
background image

VQT4X

4

9

8

8

ENGL

ISH

Radio

30 FM stations can be preset.
Preparation

Press [SELECTOR] repeatedly to select “FM”.

1

Press [RADIO MENU] to select “Auto Preset”.

2

Press [2, 1] to select “Lowest” or “Current”
frequency.

3

Press [OK] to start presetting.
To cancel, press [∫].

1

Press [6] or [5] to tune in to the station.
To tune automatically, press and hold the button until

the frequency starts changing quickly.

2

Press [PROGRAM].

3

Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.

The new station replaces any station that occupies

the same preset number.

Press the numeric buttons, [:] or [9] (main

unit: [:/6] or [5/9]) to select the preset

station.

1

Press [RADIO MENU] repeatedly to select “FM
Mode”.

2

Press [2, 1] to select “Mono” and then press
[OK].
To cancel, select “Stereo”.

“Mono” is also cancelled when you change the

frequency.

To memorise the setting

Continue with steps 2 and 3 of “Manual tuning and

presetting”.

This system can show the text data transmitted by the

radio data system (RDS) available in some areas.
Press [DISPLAY].

Note:

• RDS may not be available if reception is poor.

Clock and timers

This is a 24-hour clock.

1

Press [CLOCK/TIMER] to select “CLOCK”.

2

Within 10 seconds, press [3, 4] to set the time.

3

Press [OK].

Press [CLOCK/TIMER] to show the clock for a few

seconds.
Note:

• Reset the clock regularly to maintain accuracy.

The sleep timer switches off the system after the set

time.
Press [SLEEP] repeatedly to select the setting (in

minutes).

To cancel, select “Off”.

To show the remaining time

Press [SLEEP].
Note:

• The sleep timer can be used together with the play timer.

• The sleep timer always comes first. Be sure not to set an

overlap of timers.

You can set the timer to come on at a certain time to

wake you up.
Preparation

Set the clock.

1

Press [CLOCK/TIMER] repeatedly to select
“TIMER Adjust”.

2

Within 8 seconds, press [3, 4] to set the start
time.

3

Press [OK].

4

Do steps 2 and 3 again to set the end time.

To start the timer

1

Prepare the audio source you want to listen to
and set the volume.

2

Press [

F, PLAY].

F” is shown.

To cancel, press [

F, PLAY] again.

The system must be switched off for the timer to

operate.

To check the settings

Press [CLOCK/TIMER] repeatedly to select “TIMER

Adjust”.
Note:

• The timer starts at a low volume and increases gradually to

the preset level.

• The timer comes on at the set time every day if the timer is

on.

• If you switch off the system and switch on again while a

timer is in operation, the timer will not stop at the end time.

Automatic presetting

Manual tuning and presetting

Selecting a preset station

Improving the sound quality

RDS broadcasting

PS

Programme service

PTY

Programme type

FREQ

Frequency

Setting the clock

Sleep timer

30min

>

60min

>

90min

>

120min

>

Off

^--------------------------------------------------------------b

Play timer

SC-PMX7EG-VQT4X49.book 8 ページ 2013年1月25日 金曜日 午前10時31分

Advertising