ALESIS WILDFIRE 30 - Manual (Page 19)

4 Selecting Programs
17
After you’ve plugged everything in, you’ll probably want
to check out the factory presets we programmed into
the Wildfire. This chapter shows you how to do that.
To Select Programs
1. Make sure the Wildfire is hooked up properly and
turned on, as outlined in chapter 2.
2. Make sure you’re in PLAY mode (turn the
EFFECT knob to PLAY).
3. You can switch programs in three different ways:
Program Up/Down buttons
Use these buttons to increment and decrement
the program number. You can hold down a
button to increment or decrement programs
continuously.
VALUE knob
You also can turn this knob to switch
programs.
Footswitches (not provided with the Wildfire)
This is the easiest way to switch programs,
especially while playing your guitar. Just plug
footswitches into the FOOTSWITCH UP and
DOWN inputs and step on them to increment
and decrement the program number. You can
hold down a footswitch to increment or
decrement programs continuously.
4. Play your guitar to hear how the program affects
the sound.