Ameriphone Digital Answering Machine - Manual (Page 6)

Connecting Your Easy Recall
Answering Machine
1. First, for your safety, always
disconnect the telephone line
when installing or changing the
battery.
2. Optional - install a 9-volt
battery [not included] for back
up. The battery compartment
is located on the bottom of
the unit.
3. Insert the AC Adapter cord into
the receptacle on the back of
the Easy Recall. Then plug the
AC Adapter into an electrical
outlet.
4. Plug the telephone line cord
that comes with the Easy Recall
into the telephone jack in the
Setting up Your Easy Recall
wall and into the jack on the
back of the phone labeled LINE.
5. If using a TTY, connect the tele-
phone line cord into the jack
labeled PHONE on the back of
the Easy Recall and into the
phone jack of the TTY.
Figure 3 - Connecting the AC Adapter
4
Figure 4 - Connecting the telephone line
cord
Figure 5 - Connecting a TTY