Ameriphone Digital Answering Machine User Manual
Page 8
a message after the tone.“
• A factory installed outgoing
TTY message, “LV MSG GA.“
• A factory installed Remote
Access Code [1 1 1 1]. To
change your Remote Access
Code, use the included tem-
plate, and then follow the
directions in this manual.
Recording Your Outgoing Voice
Message
Your Easy Recall Answering
Machine already comes with the
following pre-recorded, outgoing
voice message: “Please leave a
message after the tone.”
Follow these directions to program
a personal outgoing voice
message. Make sure the machine
is ON. Remember, your personal
message will override the factory
installed one.
Setting up Your
EASY RECALL
(continued)
6
1. Simultaneously press and hold
down the REC/ERASE and
SLOW keys for 2 seconds.
2. When you lift your fingers, the
number 29 will appear in the dis-
play window.
3. Speak clearly into the microphone
and record your outgoing
message. [You’ll have a maxi-
mum of 29 seconds to do so].