Logic Controls LK1600 - Manual (Page 9)

9
LK1600 User Manual Rev. 1
INSTALLING THE LCI KEYBOARD PROGRAMMING UTILITY
1. Make sure the LK1600 is attached to the computer.
2. Double click the SETUP.EXE file on the utility diskette.
3. Select the destination folder if necessary and click “Install” to start the installation
process. Skip any warning messages by clicking “Yes” or “Continue”.
4. When installation is completed, reboot the computer.
5. Utility can be started through Windows by clicking on Start→Programs→LCI Keyboard
Utility
6. Select Keyboard type LK1600 from menu bar to show the LK1600 programming
interface. Before programming, read the template from the keyboard or load the
LK1600-L1.tpl template file. Select Template→Load→LK1600-L1.tpl (you will have to
navigate to this file within the folder that the LKWN.exe file is located).
(You may also use the LCI Keyboard Programming Utility by double-clicking the LKWN.EXE
program file in the destination folder where the utility is installed.)