Panasonic SCHC35EP - Manual (Page 10)

10
RQ
T
X
12
65
1
Press [Í] to turn the unit on.
2
Insert the disc to be played (> 9).
3
Press [CD].
4
Press [1/;] to start play.
After performing steps 1-3 in “Basic play”
1
Press [PLAY MENU] repeatedly to select
“REPEAT”.
2
Press [2, 1] to select “ON REPEAT” and press
[OK].
3
Press [1/;] to start play.
≥ To stop repeat play, select “OFF REPEAT” in step 2.
After performing steps 1-3 in “Basic play”
1
Press [PLAY MENU] repeatedly to select “PLAY
MODE”.
2
Press [2, 1] to select the following mode and
press [OK].
3
Press [1/;] to start play.
≥ During random play, you cannot skip to the previous track.
≥ The current play mode is cleared when you open the sliding door.
≥ To repeat program play or selected play mode, select “ON REPEAT” in PLAY
MENU.
Enables you to program up to 24 tracks.
After performing steps 1-3 in “Basic play”
1
Press [PROGRAM] during the stop mode.
3
Press [1/;] to start play.
≥ The program memory is cleared when you open the sliding door.
Basic play
Stop Press [∫].
Pause Press [1/;]. Press again to resume play.
Skip Press [:] or [9] to skip track.
Press [3, 4] to skip album. (MP3)
Search [CD] Press and hold [6] or [5].
Direct access
play
(Play starts from
the track you
selected.) [CD]: Press the numeric buttons to select
the track.
[MP3]:
1 Press [
3, 4] to select the album.
2 Press [ 9] once and then the
numeric buttons to select the track.
≥ This function does not work during
random play or program play.
View contents
information Press [DISPLAY] repeatedly during play
or pause.
The current track’s information, etc. is
displayed.
≥ Maximum number of displayable characters:
approximately 30
≥ This unit supports ver. 1.0, 1.1 and 2.3 ID3 tags.
Text data that is not supported will not be
displayed or shown differently.
Repeat play
Play mode function
1-TRACK
1TR
: Plays one selected track on the disc.
1-ALBUM
1ALBUM
:
[MP3]
Plays one selected album on the disc.
≥ Press [3, 4] to select the album.
RANDOM
RND
: Plays a disc randomly.
1-ALBUM
RANDOM
1ALBUM RND
:
[MP3]
Plays all tracks in one selected album
randomly.
≥ Press [3, 4] to select the album.
Program play
2
[CD]:
Press the numeric buttons to select the track.
≥ To program more tracks, continue by pressing the
numeric buttons.
[MP3]:
1 Press [
3, 4] to select the album.
2 Press [ 9] once and then the numeric buttons to
select the track.
3 Press [OK].
To program more tracks, repeat steps 1 - 3.
Cancel programme
mode Press [PROGRAM] in the stop mode to
clear “PGM” indicator from the display.
Check programme
contents Press [:] or [9] when “PGM” is
displayed in the stop mode.
Delete last
programmed track Press [DEL] in the stop mode.
Clear all
programmed
tracks 1 Press [ ∫] in the stop mode.
2 Press [ ∫] again while blinking
“CLR ALL”.
SC-HC55_35-RQTX1265.book 10 ページ ２０１１年３月２７日 日曜日 午後７時３２分