Albatron Technology DM-5952KF - Manual (Page 10)

16
Note：Volume control function will effect while connect with Vision Converter.
SET Through DM RS232 V0.9 (Serial Transmission Communication
interface) to remote control the device. To identify the monitor, you
must to set an ID number (ID=1~99) to each of the monitor under
DM RS232 V0.9 Control page.
ID To set the ID number to control the monitor from the other.
TV Select TV source.
VIDEO Select VIDEO source.
S-VHS Select S-VHS source.
Component Select a Compound signal source:
Y,Pb,Pr —For High definition component inputs.(CT-1890).
Y,Cb,Cr—For Conventional component inputs.( CT-1890∕
CT-1892).
VGA 1 Select VGA 1 source.
VGA 2 Select VGA 2 source.
TV∕PC∕AV Select TV∕PC∕VIDEO∕S-Video∕COMPONENT∕switch
source.
TV∕CATV Select TV∕CATV source.
CH + ∕ CH - Steps through the channels.
PIC-STD Factory preset.
PIC∕PAGE ▲▼ Control and select items PIC-SEL button.
PIC-SEL User video adjustment screens.
17
SYSTEM Changes the video system on TV, Video, and S-VHS.
System types are PAL, PAL-M, PAN-N, and SECAM.
FINE TUNING Allows for fine-tuning of channels.
CH-LOCK For Parental Control.
FIELD A FIELD 1 or FIELD 2 toggle. (Useable only when CCD is
on).
LANG Language Selection (1 or 2).
CAP∕TXT Accessible only when CCD is on.
CCD Caption control.