Albatron Technology DM-5952KF - Manual (Page 19)

34
STATUS CONTROL
There are 6 control entries under status control, the following statements
are related to each Control function:（See Figure A）
While without setting ID, （ ID=NO ） the Power 、 VGA 、 Instant 、 Auto-
Saving、Auto- Degauss、Auto- Shift modes and select mate signal can be
controlled to ALL devices.
Power 1. In general, select On to start the multi monitors’ functions by DM
RS232 V0.9 control.
2. Select Off and the power will be in the power-saving status
automatically.
VGA Select VGA1/VGA2 tab to switch the signal source.
Instant Enable/Disable the INSTANT-ON.
1. Set the INSTANT–ON YES, the Monitor will start up immediately
while the Power switch on, and the green LED is lit on.
2. The monitor will stay in the saving mode till the power is turn-on
again while the INSTANT-ON is switch off, and the red LED is lit
on.
Auto-Saving Select Yes to shut down the power automatically while the current
mode without signal responds or detecting a over-frequency, and
the system will be in the power-saving status while the Auto Saving
switch on.
Auto-Degauss Enable/Disable the AUTO DEGAUSS.
1. Select Yes and the AUTO DEGAUSS will be executed
automatically by every 24 hours while switch on the function
Auto-Shift Active AUTO SHIFT to protect the screen from result in the image-
remain.
1. Select Yes to active Auto Shift, and the picture will be auto-shift
once for every 6 hours.
2. Select No to quit Auto Shift set
Background Switch ON/OFF the OSD background to adapt to different OSD
background.
Moiré In general, it is better to switch OFF the moiré to get better video
performance. For some mode, is provided when Moiré is ON, adjust
MOIRE pops out, and adjust moiré by using ＋/－key. In TV/AV
mode, moiré can’t be adjusted.
35
Audio Control:
There are 5 entries under Audio control to fine-tune the Audio Volume, Bass,
Treble, Balance.
1. Select the option button on the Audio frame
2. Move the H scroll bar to adjust the audio quality.
Bass
Control the sub-woofer volume by adjusts the H scroll bar.
Treble Control the Treble volume by adjusts the H scroll bar.
Balance To adjust volume output balance by adjusts the H scroll bar.
Volume Control the volume by adjusts the H scroll bar.