Allied Telesis 86251-05 - Manual (Page 18)

18 Patch Release Note
Patch 86251-05 for Software Release 2.5.1
C613-10356-00 REV F
Debugging for DHCP and Q931 was not being disabled when a Telnet
session finished. This issue has been resolved.
A log message is now created when a user is forced to logout from an
asynchronous port when another user (i.e. someone connected via Telnet)
resets the asynchronous connection with the RESET ASYN command.
After VRRP was enabled, the link status of the switch ports was shown as
UP, even if there was no connection to the ports. This issue has been
resolved.
The SET IP MVR command now has extra error checking. This is to ensure
that if the IMTLEAVE parameter is not specified, the original range of ports
set by the CREATE IP MVR command are still contained within the newly
specified port range.
“AT-A42” was being incorrectly displayed as “AT-A42X-00” in the output
of the SHOW SYSTEM command. This issue has been resolved.
STP ignored some BPDU packets coming in on tagged ports. This issue has
been resolved. Now the VLAN tag is ignored on all devices except Rapier i
Series Switches with multiple STPs on the receiving port.
The RESET IP COUNTER=ALL command was not working correctly when
issued from the command line. This issue has been resolved.
Sometimes the Agent Address field in SNMP traps was not the same as the
IP source address. This meant that sometimes the NMS did not send an
alarm to the network manager when traps were received from switches.
This issue has been resolved.
The Uplink card sometimes unnecessarily changed its status from UP to
DOWN. This issue has been resolved.
When there were a large number of BGP routes, the SHOW BGP ROUTE
command sometimes caused an error. This issue has been resolved.
A fatal error occurred if an IP ARP route entry was deleted after an IP route
filter was added while the IP route was equal to zero. This issue has been
resolved.
PCR: 03321 Module: DHCP, Q931, TELNET Level: 4
PCR: 03332 Module: TTY Level: 2
PCR: 03333 Module: IPG Level: 3
PCR: 03334 Module: MVR Level: 3
PCR: 03336 Module: CORE Level: 4
PCR: 03341 Module: STP Level: 3
PCR: 03345 Module: IPG Level: 4
PCR: 03346 Module: SNMP Level: 4
PCR: 03348 Module: SWI Level: 3
PCR: 03349 Module: BGP Level: 3
PCR: 03350 Module: IP, SWI Level: 3