Allied Telesis 86251-05 - Manual (Page 38)

38 DELETE PPP Patch Release Note
Patch 86251-05 for Software Release 2.5.1
C613-10356-00 REV F
DELETE PPP
Syntax DELETE PPP=ppp-interface OVER=physical-interface
[other parameters]
where:
■ ppp-interface is the PPP interface number, from 0 to 511.
■ physical-interface is:
• SYNn
• DS3n
• ISDN-callname
• ACC-callname
• MIOXn-circuitname
• TDM-groupname
• TNL-callname
• VLANn-servicename
Description This command deletes the specified lower layer interface from an existing PPP
multilink bundle. The interface may be left with no lower layer interfaces.
The OVER parameter specifies the interface to be deleted.
Examples To delete the PPoE service “ANY” on vlan2 as a physical interface from PPP
interface 1, use the command:
DELETE PPP=1 OVER=vlan2-any
SET PPP
Syntax SET PPP=ppp-interface [OVER=physical-interface]
[other parameters]
where:
■ ppp-interface is the PPP interface number, from 0 to 511.
■ physical-interface is:
• SYNn
• DS3n
• ISDN-callname
• ACC-callname
• MIOXn-circuitname
• TDM-groupname
• TNL-callname
• VLANn-servicename