Advantech PENTIUM PPC-150 - Manual (Page 93)

Chapter 7 PCI SVGA Setup 77
7.2 Installation of SVGA driver
Complete the following steps to install the SVGA driver. Follow the
procedures in the flow chart that apply to the operating system that you
you are using within your PPC-150.
Important: The following windows illustrations are examples only.
You must follow the flow chart instructions and pay
attention to the instructions which then appear on your
screen.
Note 1: The CD-ROM drive is designated as "D" throughout this
chapter.
Note 2: <Enter> means pressing the "Enter" key on the
keyboard.