Panasonic RXD45EG - Manual (Page 4)

4
4
ENGLI
S
H
ES
P
A
Ñ
O
L
RQTX1040
Overview of controls
A M
N
B
I D F
C
G H
L
J
K
P
D E
O
A Tape mode/standby switch
Unit will be in standby mode.
B OPR (operation) indicator
The indicator lights up when the unit is turned on.
C Clock or timer setting, play timer setting
D Speakers
These speakers do not have magnetic shielding. Do not place them near
televisions, personal computers or other devices easily infl uenced by
magnetism.
E Disc tray
F Tuner (FM/AM) selection, auto preset selection
G Disc play or pause
H Stop disc playback, MONO selection for FM mode
I Disc tray open or close
J Play mode function, program function, tuning mode selection
K Track skip or search, check program content, preset channel selection,
tuning function, time adjustment
L Sound equalizer (EQ) selection
M Display panel
N Volume control
O Cassette play operations
P Cassette deck
Headphone jack (PHONES)
Plug type: Ø 3.5 mm stereo (not included)
• Avoid listening for prolonged periods of time to prevent hearing damage.
• Excessive sound pressure from earphones and headphones can cause
hearing loss.
PHONES
Discs
Basic play Basic play
1
Press [ x, CD OPEN/CLOSE] to open the disc tray and then load the
disc with the label facing up.
2
Press [ x, CD OPEN/CLOSE] again to close.
3
Press [ 4/9, CD] to start play.
Stop playback Press [ 8] (stop) during play.
Pause play Press [ 4/9, CD] during play.
Press again to resume play.
Skip tracks Press [–/ 2] or [6/+].
During RANDOM play, you cannot skip to tracks that have
been played.
Search
through
tracks Press and hold [–/ 2] or [6/+] during play or pause.
• During program play ( Z see below), or random play
( Z see below, “Play Mode function”), you can search
only within the track.
Play Mode function
Press [·PLAY MODE] repeatedly to select the desired mode.
1-TRACK
REPEAT
1-
Play one selected track repeatedly on the disc.
Press [–/
2] or [6/+] to select the track.
REPEAT Repeat play a disc or programmed tracks ( Z see below).
RANDOM
RND
Play a disc randomly.
✒
Note
During “Program play”, “Play Mode function” cannot be activated.
Program play
This function allows you to program up to 24 tracks.
1
Press [ 4/9, CD] and then [8] (stop).
2
Press and hold [–PGM].
“PGM” is displayed.
3
Press [– / 2] or [6/+] to select your desired track.
4
Press [–PGM].
Repeat steps 3 and 4 to program other tracks.
5
Press [ 4/9, CD] to start play.
Cancel program
mode Press and hold [–PGM] in the stop mode.
Replay the program Press and hold [–PGM] then [ 4/9, CD] in the stop
mode.
Check program
contents Press [–/ 2] or [6/+] when “PGM” is displayed in
the stop mode.
Clear all
programmed tracks Press and hold [ 8] (stop) in the stop mode.
“CLEAR” is displayed.
✒
Note
• When you try to program more than 24 tracks, “FULL” appears.
• You will not be able to add more tracks to the existing program. The existing
program has to be cleared.
• The program memory is cleared when you open the disc tray.
✒
NOTE about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical
specifi cations of the Compact Disc Digital Audio (CD-DA) format so playback
may not be possible.
✒
NOTE on CDs
Choose discs with this mark:
• This unit can access up to 99 tracks.
• This unit can play CD-DA format audio CD-R/RW that have been fi nalised.
• It may not be able to play some CD-R/RW due to the condition of the
recording.
• Do not use irregularly shaped disc.
• Do not use disc with labels and stickers that are coming off or with adhesive
exuding from under labels and stickers.
• Do not attach extra labels or stickers on the disc.
• Do not write anything on the disc.
RQTX1040-1Z_1gb.indd 4 RQTX1040-1Z_1gb.indd 4 3/31/2010 3:35:40 PM 3/31/2010 3:35:40 PM