Panasonic VDRD310EP - Manual (Page 17)

17
LSQT1140
Installation/Connection
1
Select [start] # ([Settings] #)
[Control Panel] # ([Performance
and Maintenance] #) [System].
2
Click the [Hardware] tab, then
click [Device Manager].
3
Verify the following items are
displayed.
∫ If the driver has been recognized
properly
When using a disc:
Windows XP:
≥ [MATSHITA DVD-RAM LMXK1987 USB
Device] is displayed at [DVD/CD-ROM
drives].
≥ [USB Mass Storage Device] is displayed at
[Universal Serial Bus controllers].
Windows 2000 Professional:
≥ [MATSHITA DVD-RAM LMXK1987 USB
Device] is displayed at [DVD/CD-ROM
drives].
≥ [MATSHITA DVD-RAM LMXK1987 USB
Device] is displayed at [Disc drives].
≥ [USB Mass Storage Device] is displayed at
[Universal Serial Bus controllers].
When using a card:
[USB Mass Storage Device] is displayed at
[Universal Serial Bus controllers].
∫ If the driver has not been
recognized properly
[!] or [Unknown device] appears at [Universal
Serial Bus controllers] or [Other devices], etc.
(Where the display will appear depends on the
type of computer you are using.)
You can use the following method to enable it to
be recognized.
Method 1: Turn off the unit and your computer
once and try again.
Method 2: Eject the disc or SD card from the
unit and try again.
Method 3: Try connecting the unit to another
USB port on your computer.
LSQT1140_EN.book 17 ページ ２００６年１２月７日 木曜日 午後７時４５分