Antec SOLO II - Manual (Page 20)

20
Pin SignalNames Pin SignalNames
1 USBPower1 2 USBPower2
3 NegativeSignal1 4 NegativeSignal2
5 PositiveSignal1 6 PositiveSignal2
7 Ground1 8 Ground2
9 Key(NoConnection) 10 EmptyPin
3.1 USB 2.0
Connect the front I/O panel USB cable to the USB header pin on your motherboard. Check your
motherboard user’s manual to ensure that it matches the table below:
3.2 USB 3.0
The SOLO II comes with two front panel USB 3.0 ports and includes an internal motherboard
connector. To access USB 3.0 capability from the front panel:
1.
Identify the USB 3.0 header on your motherboard.
2. Connect the USB 3.0 header to the motherboard port. Be sure to align the connector in the
proper orientation so that you do not damage the pins on your motherboard.
1 2
9 10