Antec SOLO II User Manual
Page 25
Advertising
25
4.3
O
PTIONAL
F
ANS
The SOLO II can accommodate two 120 mm front intake fans. The following shows you how to install
one of thesefans using a 120 mm TrueQuiet™ fan:
1.
Remove the fan filter as depicted in section 4.2.
2.
Insert the mounting pin through the mounting hole tail-first. Pull the tail through the hole and
push the pin through with the head of the pin. Apply a firm, consistent force, but do not yank
the pin through.
3.
If this is your desired final position for the fan’s position, you may clip the tail of the mounting
pin.
Advertising