Tone control, Tone control ……………………………………………… 58, Ch ap te r 4 - o pe ra ti on s – Adcom GTP-870HD User Manual

Page 58: Other surround modes

Advertising
background image

58

Ch

ap

te

r 4 - O

pe

ra

ti

on

s

GTP-870HD Owner’s Manual

Other Surround Modes

7.1 m

2

Uses an Adcom-proprietary digital pro-

cessing technology to expand incoming

stereo signals to 7.1-channel surround

sound. Use if:

• Your source component is connected to the ana-

log or digital audio inputs.

• Your source audio is in 2-channel analog or digi-

tal PCM format.

• You have seven speakers plus a subwoofer.

STEREO

Passes an incoming or downmixed stereo signal to

the front speakers. Use if:

• Your source component is connected to an ana-

log or digital audio input.

• Your source audio is in 2-channel analog or digi-

tal PCM format.

• You have at least two speakers (LF/RF), or would

simply prefer to listen to a multi-channel source

through your two front speakers.

HALL

Creates a hall or amphitheater effect from an incom-

ing or downmixed stereo signal. Use if:

• Your source component is connected to an ana-

log or digital audio input.

• Your source audio is in 2-channel analog or digi-

tal PCM format.

• You have at least two speakers (LF/RF), or would

simply prefer to listen to a multi-channel source

through your two front speakers.

5-STEREO

Generates maximum output for a five speaker sys-

tem. The rear speakers are driven with the same

signal as the front left and right, while the center

speaker is a monophonic summation of the front

speakers. Use if:

• Your source component is connected to an ana-

log or digital audio input.

• Your source audio is in 2-channel analog or digi-

tal PCM format.

• You have at at least five speakers (LF/RF, C, LS/

RS).

Tone Control

Manual Bass/Treble Control

Follow these steps to make Bass/Treble adjustments

on the fly:

• Press the Bypass button on the remote control to

toggle Tone Control on.

• Use the Bass and Treble buttons to bring up the

tone adjustment on-screen display.

• Use the / buttons to set the desired level.

Notes:

• The tone adjustment on-screen display times out

after 3 seconds if no button is pressed.

• Tone controls are not available in the Dolby

Digital EX, DTS-ES, NEO6, and Pro Logic IIx Surround

modes.

Advertising