Adcom GTP-870HD - Manual (Page 6)

6
Ch
ap
te
r 1 - W
el
co
m
e
GTP-870HD Owner’s Manual
Placing the GTP-870HD
Place the GTP-870HD on a stable, vibration-free sur-
face away from moisture and out of direct sunlight.
Your Adcom dealer will be pleased to show you many
different types of audio/video equipment racks and
cabinets.
The GTP-870HD’s rear panel is the central connect-
ing point for almost every component in your audio/
video system. Be sure to leave sufficient room be-
hind the rear panel to accommodate cables, antenna
leads, power cords, etc. We recommend a minimum
of 5 inches of free space for maximum flexibility.
A distance of 1/2” should be maintained around the
GTP-870HD for ventilation. Keep your GTP-870HD in
a room where temperatures remain fairly moderate,
and never cover it with table cloths, curtains, news-
papers, etc., to avoid potential overheating.
About the Remote Control
The GTP-870HD comes with a universal, programma-
ble, backlit, ergonomic remote control that is ready
for action in every sense of the word.
• For an overview of each remote button, see page
8.
• To program the remote, see page 46.
Inserting the Remote Batteries
1 Remove the cover on the back panel of the re-
mote control.
2 Insert four AAA alkaline batteries, paying atten-
tion to the correct polarities.
3 Replace the cover.