Panasonic SCHC39EC - Manual (Page 8)

8
RQT9944
You can change the transmission mode to prioritise
transmission quality or sound quality.
Preparation
≥ Press [
] to select “BLUETOOTH”.
≥ If a Bluetooth ® device is already connected,
disconnect it.
1
Press [PLAY MENU] repeatedly to select
“LINK MODE”.
2
Press [3, 4] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
≥ Select “MODE 1” if the sound is interrupted.
≥ The factory default is “MODE 2”.
If the sound input level from the Bluetooth ® device is
too low, change the input level setting.
Preparation
≥ Connect a Bluetooth
® device.
1
Press [PLAY MENU] repeatedly to select “INPUT
LEVEL”.
2
Press [3, 4] to select the level and then press
[OK].
“LEVEL 0”
,. “LEVEL i1” ,. “LEVEL i2”
^---------------------------------------------------------J
≥ Select “LEVEL 0” if the sound is distorted.
≥ The factory default is “LEVEL 0”.
1
While a Bluetooth ® device is connected:
Press [PLAY MENU] repeatedly to select
“DISCONNECT?”.
2
Press [3, 4] to select “OK? YES” and then press
[OK].
≥ You can also disconnect the Bluetooth ® device by pressing
and holding [ -PAIRING] on the unit.
≥ The Bluetooth ® device will be disconnected if a different
audio source (e.g., “CD”) is selected.
Bluetooth ® transmission mode
Bluetooth ® input level
Disconnecting a Bluetooth ® device
SC-HC39EC~RQT9944-R.book 8 ページ ２０１４年１月１７日 金曜日 午後３時５８分