Trap generation, Mib loading, Hp openview network node manager 6.41 and earlier – Avaya IP Office Phone User Manual

Page 83

Advertising
background image

Technical Data

Technical Specifications - Page 83

IP Office Installation Manual

Technical Data - Page 83

40DHB0002USCL – Issue 9 (28th October 2003)

Technical Specifications

Trap Generation

RFC1215 Generic SNMP Traps:

Trap type

Generated

warmStart

Upon soft reboot.

coldStart

Upon unexpected reboot such as a power outage.

linkDown

Upon transition of an interface (PPP or Frame-Relay) from the
up operational state into the down operational state.

linkUp

Upon transition of an interface (PPP or Frame-Relay) from the
down operational state into the up operational state.

authenticationFailure

Upon attempted SNMP request with mismatched community for
the type of operation.


IPO-MIB:

Trap type

Generated

ipoGenLKSCommsFailureEvent

Upon loss of communication with a configured License
Key Server.

ipoGenLKSCommsOperationalEven
t

Upon re-gaining communication with a configured License
Key Server.

IPO-PHONES-MIB:

Trap type

Generated

ipoPhonesChangeEvent

Upon change of a DT, DS or IP extension phone type after
normal start-up. No traps are issued for POT extensions as the
presence or absence of such phones cannot be established
hence the ipoPhonesType for such extensions is always
potPhone.

MIB Loading

In order to SNMP manage an IP Office system, that is browse its MIBs and fully interpret
the traps it sends out, the MIBs supported by IP Office must be loaded and compiled for
use with your Network Management System. The supported standard and proprietary
MIBs together with the MIB files relied upon for definitions are provided on the IP Office
Admin CD off the directory snmp_mibs. Detailed below are details of how to install the
appropriate MIBs with a number of Network Management Systems.

HP OpenView Network Node Manager 6.41 and earlier:

MIBs are installed in Network Node Manager by selecting Options and Load/Unload MIBs:
SNMP
from the menu and then using the Load… option and browsing for MIB files to load
and compile. The following MIBs must be installed in the order listed to fully SNMP
manage an IP Office system:

MIB file

Source

RFC2737-ENTITY-MIB

snmp_mibs\standard on OpenView install CD

AVAYAGEN-MIB.mib

snmp_mibs\IPOffice on IP Office Admin CD

IPO-PROD-MIB.mib

snmp_mibs\IPOffice on IP Office Admin CD

IPO-MIB.mib

snmp_mibs\IPOffice on IP Office Admin CD

INET-ADDRESS-MIB.mib

snmp_mibs\Standard on IP Office Admin CD

RFC2213-INTEGRATED-
SERVICES-MIB

snmp_mibs\standard on OpenView install CD

DIFFSERV-DSCP-TC.mib

snmp_mibs\Standard on IP Office Admin CD

DIFFSERV-MIB-HPOV.mib

snmp_mibs\Standard on IP Office Admin CD

IPO-PHONES-MIB.mib

snmp_mibs\IPOffice on IP Office Admin CD


Advertising