Panasonic CUG95KE - Manual (Page 14)

▲ 12
■ Auto Vertical Airflow Direction Control
Heating
When the discharge air temperature is low such as at starts of heating
operation, the air blows at horizontal level.
As the temperature rises, the hot air blows in a downwards direction.
Cooling ● Soft Dry
The louver swings up and down automatically.
AUTO
AUTO FAN
FAN SPEED
WIDE/SPOT
AIR SWING
TIMER
CLOCK
1
2
3
ON OFF
SET CANCEL SLEEP
MODE
AUTO
Adjusting Airflow Direction and Fan Speed
Proper adjustment of airflow direction and fan speed increases
operation effectiveness.
SPOT WIDE
POWER LOW HIGH SLEEP TIMER
POWERFUL
POWER MONITOR POWER LOW HIGH SLEEP TIMER
POWERFUL
POWER MONITOR
Press FAN SPEED Button
● There are five stages of fan speed in addi-
tion to Auto Fan Speed.
Press Button
● There are seven positions of the horizontal airflow direction louvers
in additional to Auto Airflow Direction.
The display changes when the button is pressed.
(The display does not show the exact directions of airflow or the
exact louver angles.)
To adjust the vertical airflow direction louvers
■ Auto Fan Speed Control
Heating
When the temperature of the discharge air increases,
the fan speed increases.
Cooling ● Soft Dry
Changes the fan speed to generate a cool breeze. The air starts to blow out
approximately 40 seconds after the start of Cooling or Soft Dry.
■ Auto Horizontal Airflow Direction Control
Heating
When air temperature is low, air is sent in WIDE. When temperature goes up,
air comes out in SPOT.
Cooling ● Fan
Louvers swing horizontally at a fixed speed.
Soft Dry
Louvers are fixed to WIDE.
To adjust fan speed
To adjust the horizontal airflow direction louvers
Auto Fan
Speed
Medium Fan
Speed
Display Example
COOL
AUTO FAN
COOL
h j k
Press Button
● There are five angles of vertical direction in addition to Auto Airflow
Direction.
The display changes when the button is pressed.
(The display indicates airflow direction.)