Asus AP1600R - Manual (Page 21)

ASUS AP1600R 1U Rackmount Server 21
Placement Direction
When installing the motherboard,
make sure that you place it into the
chassis correctly. The edge with the
external ports goes to the rear part
of the chassis.
Motherboard Screws
Place six (6) screws in the holes
indicated by circles to secure the
motherboard to the chassis. Do not
overtighten the screws. Doing so
may damage the motherboard.
2.2 Motherboard Placement
The motherboard and other internal components of the AP1600R
server are already installed as indicated in section
“1.4 Internal
Features”. Refer to the motherboard user’s manual for detailed
technical information about the motherboard.
NOTE
You must remove the protruding screws (indicated by black circles
above) on the rear panel high-density SCSI connector before
installing or removing the motherboard. Otherwise, you cannot
properly install or remove the motherboard.
NOTE
Place this side
towards the rear
of the chassis