ACR Electronics ZE-NES14 - Manual (Page 10)

10
BASIC OPERATIONS
POWER ON/OFF
■ Press any key on the front panel or the [POWER] key on the remote control to turn on
the power under standby mode. The unit goes back to the last status after power on.
■ Press and hold the [SRC] key on the front panel or press the [POWER] key on the the
remote control to turn off the power under work mode.
NAV
■ Press the [NAV] key on the front panel to enter or exit navigation source. The current
audio channel will keep playing, except the navigation voice comes up when navigation
source is active.
VOLUME ADJUSTMENT
■ Turn the volume knob on the front panel or press the [VOL] key on the remote control.
■ The adjustable range of volume is 0 to 40.
■ Press [VOL] key or mute key on remote to active or deactive [MUTE] function.
ƽ
NOTES:
■ Doing the operation above again or adjusting volume wlll release muting.
■ Mute icon blinks on the TFT during muting.
OPEN SOURCE MENU
■ Press the [SRC] key on the front panel or remote control or touch the top left corner of
the screen to open the SOURCE MENU. Do the above operation again to return to the
original source.
PLAYING SOURCE SELECTION
■ Open the SOURCE MENU, and then touch the source you desired or select one source
by moving the cursor and then confirm.
ƽ
NOTES:
■ Playing source selection means selecting work mode, such as DVD mode, Radio mode,
Camera mode, etc.
■ When some devices are not ready or connected, they cannot be selected.