ACR Electronics ZE-NES14 - Manual (Page 9)

ZE-NC514
9
BEFORE USING
NOTES FOR REMOTE CONTROL USE
1. Aim the remote control at the remote sensor on the unit.
2. Remove the battery from the remote control or insert a battery insulator if the battery has
not been used for a month or longer.
3. DO NOT store the remote control under direct sunlight or in high temperature
environment, or it may not function properly.
4. The battery can work for 6 months under normal conditions. lf the remote control does
not work, please change the battery.
5. Use "button shaped" lithium battery "CR2025" (3 V) only.
6. DO NOT recharge, disassemble, heat or expose the battery in fire.
7. lnsert the battery in proper direction according to the (+) and (-) poles.
8. Store the battery in a place where children cannot reach it to avoid the risk of accident.
Uninstall Battery
■ Slide out the battery compartment tray at the bottom on the back of the remote control.
Install Battery
■ Use button-shaped lithium battery "CR2025" (3V) only. Insert the battery to the battery
tray with proper direction according to the (+) and (-) poles.
PULL OUT PULL IN