Panasonic KXTG6431 User Manual
Page 38
Voice Mail Service
38
For assistance, please visit http://www.panasonic.com/help
Turning VM tone detection on/off
The default setting is “On”.
1
{
MENU} i {#}{3}{3}{2}
2
{V}
/{^}: Select the desired setting.
i
{SAVE} i {OFF}
Listening to voice mail
messages
The unit lets you know that you have
new voice mail messages in the
following ways:
– “New Voice Mail” is displayed on
the handset if message indication
service is available.
– The message indicator on the handset
flashes slowly if message alert feature
is turned on (“Message alert”; page
36).
1
Press {C}, then press {VM} within
15 seconds.
OR
{
MENU} i {#}{3}{3}{0}
L
The speakerphone turns on.
2
Follow the pre-recorded
instructions.
3
When finished, press {OFF}.
Note:
L
If {VM} is not displayed, the voice mail
access number has not been stored.
Store the number (page 37).
L
If the handset still indicates there are
new messages even after you have
listened to all new messages, turn it
off by pressing and holding {OFF}
until the handset beeps.
L
If your voice mail service uses voice
mail tones and a message is over 3
minutes long, the handset may not
indicate new messages.
L
If your voice mail service uses voice
mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
to listen to voice mail messages, you
have to dial your access number
manually.
TG643x(e).book Page 38 Monday, December 1, 2008 10:13 AM