Display/indicators, Charging the cellular phone by usb, Belt clip – Panasonic KXTG7873 User Manual
Page 14: Getting started
Charging the cellular phone by
USB
Available for:
KX-TG7871 series (page 3)
By connecting a USB cable (not supplied) to
the cellular phone and the base unit, you can
charge a cellular phone. However, the cellular
phone cannot exchange data with the base
unit through a USB cable.
Belt clip
n
To attach
n
To remove
Display/Indicators
Handset display items
Item
Meaning
Within base unit range
Item
Meaning
Out of base unit range
The landline is in use.
R When flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
A cellular line is in use.
R When flashing:
The cellular call is put on
hold.
R When flashing rapidly:
A cellular call is being
received.
1
A cellular phone is
connected.
receive cellular calls.
R When turned off:
A cellular phone is not
connected to the base
unit. (page 19)
– The cellular line is
selected for the ringer
setting.
– A cellular call is being
received on that line.
Eco mode is on.
Noise reduction is set.
(page 24)
Equalizer is set. (page 24)
Z
Speakerphone is on.
(page 21)
Ringer volume is off.
(page 22, 38)
Silent mode is on.
(page 45)
Call sharing mode is off.
(page 41)
Alarm is on. (page 44)
Handset number
Battery level
Blocked call (page 45)
14
For assistance, please visit http://www.panasonic.com/help
Getting Started
TG78xx(en)_1210_ver101.pdf 14
2012/12/10 21:19:25