ATEN CS-228 - Manual (Page 22)

w
F7 QV
You can broaden or narrow the number of ports that get automatically scanned by
selecting only the ones you want with the QV (Quick View Scan) function. [F7] is a
toggle that selects or deselects the currently highlighted port for the Quick View
Scanning function (see F4, above). To select/deselect a port for Quick View Scanning:
1. Double Click the port you want, or use the Navigation Keys to move the highlight
bar to it.
2. Press [F7].
When a port has been selected for Quick View Scanning, an arrowhead displays in the
QV column to indicate so. When a port is deselected, the arrowhead disappears.
w
F8 Out
Clicking the F8 field, or pressing [F8] logs you out of OSD control of the computers,
and blanks the Console screen. This is different from simply pressing [Esc] to
deactivate the OSD, since with this function you must log in all over again to regain
access to the OSD.
Note: 1. When you reenter the OSD after logging out, the screen stays blank except
for the OSD Main Menu. You must input your password before you can
continue.
2. If you reenter the OSD after logging out, and immediately use [Esc] to
deactivate the OSD without having selected a port from the OSD menu, a
Null Port message displays on the screen, and the system reverts to Logout
status.
Factory Default Settings
The factory default settings are as follows:
Setting Default
MULTIUSER MODE Enabled
ACCESS TIMEOUT 10 Seconds
OSD HOTKEY [Ctrl] [Ctrl]
DISPLAY MODE The Port Number plus the Port Name
DISPLAY DURATION 3 Seconds
SCAN DURATION 3 Seconds
2001-02-01
18 CS-228 User Manual